Mapei S.p.A. --
Go Home


Go Home
-------------------------
About US
-------------------------
Product
-------------------------
Factory Tour
-------------------------
 Management
-------------------------
OEM/ODM
-------------------------
Quality Control
-------------------------
R & D
-------------------------
Contact Us

Mapei S.p.A.
Product

Product Search
Model number:BM00188
Product Name:Waterproof, Heat Insulation Materials
Area Made:IT
Explanation:Permanent encapsulation of asbestos cement and flexible, waterproofing and anti-fracture liquid membrane
Model number:BM00187
Product Name:Waterproof, Heat Insulation Materials
Area Made:IT
Explanation:Ready-to-use heavy-duty waterproofing cementitious mortar. Use Idrosilex Pronto to waterproof foundations, walls, cellars, basements, lift-rooms, swimming-pools, canals and reservoirs. Formulated from cement binders and special waterproofing additives, Idrosilex Pronto is prepared by mixing a 25 kg bag with 6-6.25 litres of clean water. Idrosilex Pronto can be applied with a brush, trowel or spray. For application by brush or spray, apply 2-3 coats to the perfectly cleaned and solid substrate which must be thoroughly soaked with water beforehand. When applying by trowel reduce the mixing water to 5-6 litres for each bag. Consumption 1.6 kg per mm of thickness. Packaging 25 kg bags (grey and white).
Model number:BM00186
Product Name:Waterproof, Heat Insulation Materials
Area Made:IT
Explanation:Fast drying flexible liquid membrane for interior waterproofing. Applications: Liquid waterproofing membrane for interior surfaces provided they are not continually immersed in water or subject to rising damp. Mapegum WPS can be used on all types of substrates such as: gypsum board walls, gypsum and cementitious renders, light-weight concrete blocks, wood, existing ceramic tiles, cementitious and anhydrite substrates, wood substrates, magnesite, hot poured asphalt. Waterproofer for bathroom and shower walls and floors before installing ceramic tiles and natural stone; waterproofing kitchen floors and walls and counter tops before installing ceramic tiles. N.B.: Mapegum WPS has been certified by the following institutes as a waterproofing membrane for damp environments, to be applied underneath tiled surfaces. ?Säurefliesner (Germany): tested in accordance with current standards. ?SP Swedish National Testing & Research Institute (Sweden): tested in accordance with BKR Standards (Building Ceramics Council). ?Norwegian Research & Building Institute: tested in accordance with current standards. Technical data: Formation of surface skin: 1 hour. Complete drying (2 mm of thickness at +23°C): 5 hours. Waiting time: 1-2 hours between each coat; 12-24 days before laying ceramic. Colour: light grey. Application: by trowel, with a roller or by spraying. Storage: 24 months. Protect from frost. Consumption:1.5 kg/m2 per mm of thickness. Packaging:5, 10 and 25 kg drums.
Model number:BM00185
Product Name:Waterproof, Heat Insulation Materials
Area Made:IT
Explanation:Two-component waterproofing and consolidating primer, in solvent solution, for screeds and industrial flooring. Where to use: ?Primer for the consolidation of surfaces of dusty or crumbly cementitious screeds, for anhydrite screeds, radiant heated screeds, old terrazzo tiles, gypsum and gypsum board. ?Waterproofing damp screeds to isolate residual moisture. ?Anti-dust impregnating primer over industrial flooring, garages, raised flooring. If a levelling compound is used after the application of Primer EP, spread dry sand over the just treated surface to create a suitable mechanical key. The substrate must be dry and clean, free of oil, grease, traces of paint and any loose particles. Technical data: Minimum drying time: 24 hours depending on the porosity of the substrate. Consistency: liquid. Colour: transparent. Flammability: yes. Application temperature range: from +10°C to +40°C. Pot life of the mixture: 4-5 hours. Mixing ratio: Part A : Part B = 1 : 1. Storage: 24 months. Application: by roller, brush or watering can. Consumption:0.5-0.7 kg/m2. Packaging:5+5 kg drums.
Model number:BM00184
Product Name:Waterproof, Heat Insulation Materials
Area Made:IT
Explanation:Waterproofing admixture for concrete. Use Idrocrete DM to prepare concretes with low water absorbency and to prevent surface efflorescence. Idrocrete DM is especially recommended as a waterproofer in concrete used for vibro-compress products such as blocks, drain sumps, kerbs, self-locking blocks etc. Idrocrete DM can be used in combination with the plasticiser and superplasticiser additives of the Mapefluid, Mapemix, Mapeplast lines for waterproofing concrete with fluid and super fluid consistencies. Add Idrocrete DM directly into the mix after all the other ingredients (cement, aggregate, water). Coverage 0.25-1 kg for every 100 kg of cement (0.25-1 l). Packaging 25 drums - 200 l drums - 1000 l tanks. Also available in bulk on request.
Model number:BM00183
Product Name:Waterproof, Heat Insulation Materials
Area Made:IT
Explanation:Bituminous paint in solvent solution. Use Isamite as an adhesive primer for waterproofing with bituminous membranes. Isamite can also be used as a protective paint for concrete and masonry walls in direct contact with the ground, for underground metal structures, the inside of waste water tanks and for metal gutters. Isamite is a ready-to-use bitumen based product in solvent solution. Isamite can be applied by brush or spray in two coats on clean, solid and dry substrates. After it has completely dried, Isamite applied in the appropriate thickness forms a protective and waterproof coat. N.B. ADR/RID approved packaging.Coverage ¡V on metal surfaces: 100-150 g/m2 per coat; ¡V on concrete: 250-300 g/m2 per coat.Packaging 10 kg drums.
9  3[ 1 ] 4  :
Contact Details
Email:mapei@mapei.it
Key Contact
Tel:+39-02-376731
Email:mapei@mapei.it
Fax:+39-02-37673214
Name:Sales
Website:www.mapei.it
Professional title:Service personnels
Address:Via Cafiero, 22 Milano - Italy